0

Modem configuration of BSNL broadband

Channel Configuration

The DSL WAN connection can be separated virtually into multiple channels by assigning different VPI/VCI in each Permanent Virtual Circuit (PVC). In each PVC you can also set the connection protocol to be PPP, Dynamic IP, Static IP or Bridge mode. 

Note : The "Connect" and "Disconnect" button will be enable only when the connect type of PPPoE and PPPoA is "Manual"

Default Route Selection:  Auto Specified  
VPI: 8   VCI: 35         Encapsulation: LLC
Channel Mode:         Enable NAPT:
Enable IGMP:   
PPP Settings:
User Name:Password:
Type:Idle Time (min):
WAN IP Settings:
Type:Fixed IPDHCP
Local IP Address:Remote IP Address:
Netmask:
Default Route:DisableEnable  Auto
Unnumbered

Unknown

Phasellus facilisis convallis metus, ut imperdiet augue auctor nec. Duis at velit id augue lobortis porta. Sed varius, enim accumsan aliquam tincidunt, tortor urna vulputate quam, eget finibus urna est in augue.

No comments:

Post a Comment